VIO CHIMNEY
Chimney sweep in Maine — homes with rooftop chimneys

ME · Screened local pros

Chimney sweep
in Maine.

More wood heat per household than almost anywhere, in old farmhouse chimneys.

Get my estimatePrefer to talk?(513) 655-6702
5.0/5
8 verified reviews
104
freeze-thaw cycles a year
1976
median year a home here was built
Ethan MillerEthan Miller · reviewed the methodData rebuilt August 20263 min read
Is this your chimney?

The problems Maine homeowners actually call about

Not a generic list: these are what this market's weather and housing actually produce. Find yours; the fix and the honest price are one tap below it.

Torchlit view up a chimney flue coated in black flaky creosote
01

Heavy wood heat through a long winter. Is the flue keeping up?

  • A stove or fireplace running daily for months
  • Creosote visible within one season of a sweep
  • A masonry repair list that keeps waiting for a warm week

Why it happens in Maine: Maine burns more cordwood per household than nearly any state, much of it through old farmhouse chimneys that are tall, often unlined, and built for a different century. Heavy use plus old flues is the highest-stakes combination in this trade, and it is Maine's default.

What fixes it, and what it costs

Serious burn hours mean the annual sweep is a floor: heavy burners here often need a mid-season look, and glazed creosote handled as its own job. The masonry calendar is the other constraint: mortar will not cure through the deep cold, so crown and joint work found in autumn books for spring, and the smart inspection happens early enough to beat that queue.

Standard single flue, wood-burning
$170–$320
Stage three glazed creosote
$400–$900
Full price breakdown →Chimney Cleaning →Chimney Liner Replacement →
Get this looked at(513) 655-6702
Chimney brick faces flaking and popping off, exposing pale powdery masonry underneath from freeze damage
02

Brick faces flaking off, or mortar turning to sand?

  • Flakes or whole faces of brick on the roof or in the yard, worst in spring
  • Mortar you can rake out of the joint with a house key
  • White chalky staining spreading across the stack

Why it happens in Maine: The temperature in Maine crosses freezing roughly 104 times a year, and every crossing expands the water already soaked into brick and mortar by about nine percent. It is that repetition, not any single cold night, that opens joints and takes the fired face off older brick. The one repair that makes this worse is repointing with modern high-strength cement: harder than the old brick, it forces the brick to take the movement instead, and the faces spall off around joints that still look perfect.

What fixes it, and what it costs

Repointing with a mortar matched to the original (raked to depth, refilled, cured above freezing) and recasting the crown where it has opened. Where faces have already spalled through, the affected courses are rebuilt with matched brick. Then, and only then, a vapor-permeable water repellent, because sealing water into a wet stack is worse than doing nothing.

One accessible face
$400–$1,200
Full stack, four faces
$1,500–$4,000
Flexible seal over a sound crown
$200–$500
Full price breakdown →Chimney Tuckpointing →Chimney Crown Repair →Chimney Repair →Spalling bricks, explained →
Get this looked at(513) 655-6702
Twigs and nesting material piled on a chimney smoke shelf under torchlight
03

Scratching, chirping: something living in the chimney?

  • Scratching or flapping sounds, strongest at dawn and dusk
  • Debris, twigs or droppings appearing in the firebox
  • No cap on the flue, or one that has visibly shifted

Why it happens in Maine: An open flue is a den entrance, and the calendar decides the response. Chimney swifts are federally protected while nesting, so removal legally waits for fledging, usually late summer. Raccoons leave with persuasion and a one-way door; what never works is lighting a fire under any of them, which endangers the animal, the flue and the house in one move.

What fixes it, and what it costs

Humane removal on the right schedule, a full sweep afterwards (nests are tinder sitting in a chimney), and then the actual fix: a fitted stainless cap with mesh, which ends the whole cycle for a modest, one-time cost. It is the single highest-value part on the chimney.

Single flue, 304 stainless, fitted
$150–$400
Single flue, galvanised
$90–$220
Full price breakdown →Animal & Nest Removal →Chimney Cap Installation →Animal in the chimney? →
Get this looked at(513) 655-6702
Hands lowering an inspection camera into a flue as the monitor shows the liner
04

Sure the whole stack was inspected, or just the fireplace?

  • A pre-war house whose chimney serves the furnace or boiler too
  • A sweep receipt that lists one flue, in a stack built for two or three
  • Rust, damp or smell near the heating flue nobody ever opens

Why it happens in Maine: 23% of Maine's homes predate 1940. Houses of that era ran fireplace and heating plant up the same masonry stack, and when the heating was modernised the shared flue usually was not. An oversized, cool-running appliance flue condenses and deteriorates for decades behind a fireplace that looks perfect, and a quote that covered "the chimney" often covered one flue of three.

What fixes it, and what it costs

A camera pass down every flue in the stack, not only the one behind the damper. It is the only way to see breached tiles and open joints between flues, and on older stacks it is the difference between an inspection and a look. If a liner has failed, relining that flue is the repair, and knowing before winter beats finding out during it.

Second or third flue in the same stack
+$80–$150 each
Level 1 with an annual sweep
$0 — included
Level 1 on its own
$100–$180
Full price breakdown →Level 2 Chimney Inspection →Chimney Liner Replacement →Why does my fireplace smoke? →
Get this looked at(513) 655-6702

Weather figures from NOAA daily observations at Portland, 2019–2024. Housing figures from the US Census ACS 2023 5-year estimates. Figures describe Maine as a market, never any one building; only an inspection tells you about yours.

Straight prices

What chimney work costs in Maine

One price list nationwide: Maine pays what every city pays, and there is no neighborhood surcharge. What moves the number here is the housing: older Maine stacks often carry more than one flue, and each is swept and scanned separately.

Standard single flue, wood-burningMoves with: roof access and pitch$170–$320Second or third flue in the same stackMoves with: each is swept and scanned separately+$80–$150 eachLevel 1 on its ownMoves with: an hour, no specialist equipment$100–$180Single flue, 304 stainless, fittedMoves with: flue size and roof access$150–$400Reseal sound counter-flashingMoves with: half a day, metal reused$300–$500Flexible seal over a sound crownMoves with: hairline cracks only$200–$500One accessible faceMoves with: area and whether a ladder reaches it$400–$1,200

Bands, not promises. The exact number depends on what the visit finds, which is why every job starts with a written estimate you approve before anything else happens. If a quote here ever grows on the invoice, you got the wrong company.

(513) 655-6702Get my written estimate
What we handle in Maine

Every chimney service,
one front door.

Full service catalog →
Sweep's brush head and rods leaning against a freshly swept firebox on a drop cloth

Chimney Sweep in Maine

Brush-and-vacuum sweep with a camera check on the same visit.

Learn more →
Chimney sweep on a rooftop feeding brush rods down a flue beside a vacuum hose

Chimney Cleaning in Maine

Flue brushed to bare tile, with the camera scan included.

Learn more →
Hands lowering an inspection camera into a flue as the monitor shows the liner

Chimney Inspection in Maine

Every flue in the stack, not only the fireplace.

Learn more →
Gloved mason pressing fresh mortar into brick chimney joints with a pointing trowel

Chimney Repair in Maine

Freeze damage, repaired with mortar matched to the original.

Learn more →
Close view of metal flashing and fresh sealant where a brick chimney meets shingles

Chimney Leak Repair in Maine

Hose-tested one section at a time, so the entry point is found.

Learn more →
Half-tuckpointed brick chimney with crisp new mortar beside crumbling eroded joints

Chimney Tuckpointing in Maine

Joints raked to depth and refilled with a matched mix.

Learn more →
Sealant rolled onto chimney brick with water beading on the treated section

Chimney Waterproofing in Maine

Before the first freeze, and only once the joints are sound.

Learn more →
Stainless steel chimney cap with mesh screen being fitted onto a clay flue tile

Chimney Cap Installation in Maine

Rain, animals and downdrafts, solved by one part.

Learn more →
Dryer vent duct pulled from the wall showing heavy lint buildup inside

Dryer Vent Cleaning in Maine

The full run cleared, on the same visit.

Learn more →
Before you call

What happens when you get in touch.

  1. Your request goes to a screened local company that covers your ZIP code.

  2. They look at the chimney and put the price in writing before starting anything.

  3. You approve the number, or you don't. Either way the visit costs you nothing to arrange.

Call (513) 655-6702

What you get

  • The price before the work

    A written estimate first, every time. Nothing starts until you have said yes to the number.

  • You see the reason, not just the price

    Anything a pro says needs doing, they show you first: on camera where the job calls for a level 2 scan, in front of you where it does not.

  • Somewhere to go if it goes wrong

    Tell us and it gets recorded and acted on. A company that fails the standard loses its place in the network, and that is a lever we actually hold.

Every company in the network is checked for license and insurance before it joins, and checked again if a complaint comes in. It is a check on the business, not a guarantee about the person who knocks, so ask to see both before work starts.

No phone call needed

Rather type than talk? Start it here.

A screened local pro takes it from there, with the price in writing before any work. Four fields, and the Maine pro who covers your ZIP calls you back; you never wait on hold to ask a question.

Request service in Maine

Serving Maine

Tell us what's going on. A screened local pro confirms a time.

Your details go to the pro who covers your ZIP, and nowhere else. By submitting you agree we may call or text you about your request — SMS terms.

Homeowners on VIO

Maine homeowners on VIO CHIMNEY

5.0 / 58 verified reviewsHow we verify

Courteous from the first call to the walkthrough

“Everyone we dealt with was on time and respectful of the house — shoe covers, drop cloths, the whole routine. The technician explained everything in plain English and never tried to sell us something we didn't need. We've already recommended VIO to two neighbors.”
Susan K., verified customer

Susan K. Verified

Dryer Vent Cleaning

Dryer works like new again

“Our dryer had been taking two cycles for a single load. The technician pulled a startling amount of lint out of the vent run and showed me the airflow difference afterward. Only wish I could have gotten a slot a bit sooner — the work itself was great.”
Derek B., verified customer

Derek B. Verified

Chimney Inspection

Straight answers, zero upsell

“I filled out the request form expecting phone tag and got a real appointment window instead. The inspector was patient with all of my questions and left us a simple list of what was fine and what wasn't. Refreshingly straightforward from start to finish.”
Angela P., verified customer

Angela P. Verified

Storm-damaged cap replaced without the runaround

“A windstorm knocked our old chimney cap loose and birds had started taking an interest. the company they matched us with fitted a screened stainless cap and pointed out some early crown wear to keep an eye on — with zero pressure to do anything else on the spot.”
Beth C., verified customer

Beth C. Verified

Franklin, TN

Chimney Cleaning

Thorough, tidy, and honest

“Took a little back-and-forth to land a time that worked, but the visit itself was excellent. The technician showed me the creosote on camera before cleaning and again after, and left zero dust behind. The fireplace draws noticeably better now.”
Travis H., verified customer

Travis H. Verified

East Nashville

Level 2 Inspection

The inspection our home purchase needed

“We scheduled a Level 2 inspection before closing on a house in Westlake. The camera scan came with a written report in plain English that we handed straight to our agent. No scare tactics — just a clear list of what needed attention and what didn't.”
Dana W., verified customer

Dana W. Verified

Westlake, OH

Ethan Miller and Ryan Carter of VIO CHIMNEY beside a branded service truck

Ethan Miller · Chimney specialist

Ryan Carter · Founder

Who we are

Real people, on real roofs, since 2019.

VIO CHIMNEY was founded by Ryan Carter in 2019, and 7 years later the promise has not moved: a written estimate before any work, a level 2 scan you can watch if the job calls for one, and a pro who explains what they found in plain language.

Every guide and page on this site is reviewed by Ethan Miller, our chimney specialist, so what you read here matches what the work actually involves on a roof, not marketing copy about it.

Book a visitOur story and standards →
From the guides

Guides for your chimney.

All guides →
Custom fireplace built as a full stone wall with a linear firebox in a living roomNational

Custom Fireplace Planning: What Your House Can Actually Take

Planning a custom fireplace? The three tiers, why venting decides the design, and the code rule on mantels. VIO matches you with local pros who look first.

guides · 16 min
The fireplace seen from a living room, a sooty masonry firebox with a steel lintel and brick hearthNational

The Fireplace: What You Are Actually Looking At, and Whether You Can Light It Tonight

Learn the parts of the fireplace, identify which type you own, and check it safely. VIO matches you with an independent local chimney company.

guides · 16 min
Chimney spark arrestor screen inside a stainless multi-flue cap on a brick chimney at duskNational

What a Chimney Spark Arrestor Is, and How to Tell If Yours Passes

A chimney spark arrestor is the mesh screen on your cap. Get the code specs, check yours from the ground, and let VIO match you with a local pro.

guides · 14 min
Good to know

Common questions.

How often should a chimney be swept in Maine?

NFPA 211 sets the annual bar as an INSPECTION of every chimney regardless of use, with cleaning when the condition of the flue calls for it. In Maine the freeze cycles make keeping that date worth it. A flue that goes into winter carrying creosote or an open joint gets the damage compounded by every freeze.

What does a chimney inspection cover in Maine?

The full flue on camera, the crown, the flashing and the mortar joints. On Maine's older housing stock the mortar itself is part of the inspection: pre-war brick needs a matched mix, and a repair quoted without checking that is a repair that can make things worse.

Who actually does the work in Maine?

An independent local chimney company we match you with. VIO does not perform the work. We check business identity, any license the work requires locally, and insurance before a company joins the network, and we require a written estimate before anything starts. The company you hire sets its own price and bills you directly.

How fast can someone come out in Maine?

Most visits are scheduled within a few days, faster for active leaks or a chimney you suspect after a fire. Scheduling is set by the local company that takes the job, so the fastest route is to say how urgent it is when you request, or call (513) 655-6702 and say it out loud.

Maine, let's get it on the calendar.

Give us the ZIP code and what is going on. We pass it to a screened local pro who covers it, and you get the price in writing before any work starts.

Get my written estimateCall (513) 655-6702
(513) 655-6702Get my estimate